MEBAPro 300A
Product information "MEBAPro 300A"
Machine casing: safe and compact
- Additional security with integrated splash guards through safety tunnels and splash guards
- Large inspection openings enable good accessibility for service and maintenance work
Saw band guides: accurate and reliable
- Easy opening of the saw band guide when changing the saw band
- Lateral belt guidance is combined from preloaded hard metal sliding guides and belt twisting rollers
- High cutting pressure forces and increased saw band service life thanks to roller back guidance
Saw frame feed: powerful and dynamic
- Saw feed with AC drive via electrically frequency-controlled ball screw for exact quality when sawing
- Process security through permanent cutting pressure and feed monitoring and automatic adjustment of the saw feed speed if the cutting pressure is too high
Vice system: safe and smooth
- Automatic material feed with hydraulic material full stroke clamping via dynamic, servo-controlled ball screw technology
- Precision, ease of movement and freedom from maintenance with simultaneous high loads thanks to large-scale, linear-guided recirculating ball bearings
- Powerful, hydraulic material clamping with full-stroke cylinder
- Opening of the slide-in vise on both sides
- Full-stroke clamping Double vice for safe, low-burr sawing
Material free lift device: economical and practical
- Protection and increased service life of the saw band: when the saw band is raised from the material, the cutting channel is widened by lifting the material after the sawing cycle has ended
Operation and control: intelligent and ergonomic
| cutting area | mm | mm |
| 90° | 300 | 300x300 |
| engine [kW] | 3 | |
| saw band [mm] | 4900x34x1.1 | |
| Belt speed [m/min] | 15-130 | |
| Dimension [mm] (LxWxH) | 1650x2500x1800 | |
| weight [kg] | 2500 | |
| Material support weight [kg/m] | max 250 | |
| working height [mm] | 750 | |
| Insertion length single stroke [mm] | 600 | |
standard equipment
- Automatic band saw with partial paneling for safe, clean and quiet work
- Large wheel housing cover, which can be opened upwards with the help of a gas spring, for easy access when changing the saw blade and cleaning work
- Stability and quality through torsion-resistant welded construction
- Precise saw frame guidance through external double portal construction in connection with linear and ball screw technology
- Lateral belt guidance is combined from preloaded hard metal sliding guides and belt twisting rollers
- High cutting pressure forces and increased saw band service life thanks to roller back guidance
- Saw feed via AC drive via electrically frequency-controlled ball screw for exact quality when sawing
- Infinitely adjustable saw feed speed from 0-600mm/min
- Process reliability through permanent cutting pressure and feed monitoring and automatic adjustment of the saw feed speed if the cutting pressure is too high
- Electrical belt tension monitoring and optical LED display
- Powerful and energy-efficient 3 kW saw motor
- Infinitely adjustable cutting speed of 15-130 m/min
- Large coolant tank, approx. 100 litres
- Double filter system: integrated filter screen in the coolant tank and additional filter box on the coolant pump
- Automatic belt break monitoring and shutdown in the event of a belt break
- Saw band tension via spring assembly
- Optimum cleaning of the tooth cutting edge: powered round brush removes dirt and chips from the saw band, synchronous with the saw band speed
- Automatic material feed with hydraulic material full stroke clamping via dynamic, servo-controlled ball screw technology
- Stable, linear-guided push-in vise for maximum positioning accuracy
- Integrated material end detection
- Opening of the slide-in vise on both sides
- Closed roller conveyor. Use of ball-bearing precision rollers for smooth transport
- Material free lift: Protection and increased service life of the saw band - when the saw band is raised out of the material, the cutting channel is widened by lifting the material after the sawing cycle has ended
- Practical parts disposal via inclined section chute with integrated coolant return
- Robust panel controller with touchscreen (4.3"), menu-driven, self-explanatory symbols via Windows CE
- Fully automatic sawing process for any length and quantity
- Easy program creation and management
| Product number: | MEBApro300A |
|---|---|
| Automation level: | Serial cut |
| Cutting material: | Pipe, Round Stock Material |
| Dimensions: | 1650x2500x1800 mm |
| Max. cutting range height ↕ (mm): | 300 |
| Max. cutting range width ↔ (mm): | 300 |
| Max. cutting range Ø (mm): | 300 |
| Type: | Miter Saw 90° |
| Type series: | MEBApro |
| weight: | 2500 KG |
| Schnittgeschwindigkeit: | 15 - 130 m/min |
| Reststücklänge: | 20 mm |
| Antrieb - Sägeband: | 3,0 kW |
| Sägebandspannung: | Hydraulisch |
| Sägebandabmessung: | 4900x34x1,1 mm |
| Arbeitshöhe: | 750 mm |
Login
Zubehör
MEBA bandsaw blade - Allround+ 4900x34x304
€45.76*
O-490034304
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Allround+ 4900x34x406
€45.76*
O-490034406
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Allround+ 4900x34x203
€45.76*
O-490034203
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Allround+ 4900x34x812
€45.76*
O-490034812
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Performance+ 4900x34x203
€58.63*
OX490034203
The Performance + band saw blade impresses with its tooth profile
for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance.
wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials
with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels,
high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings
and unalloyed tool steel. Aluminum, copper and brass,
High-speed steel and cold work steel. Nitriding steel, stainless and
acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal
For customers who value a long service life and shorter sawing times.
sawing times.
MEBA bandsaw blade - Performance+ 4900x34x406
€58.63*
OX490034406
The Performance + band saw blade impresses with its tooth profile
for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance.
wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials
with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels,
high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings
and unalloyed tool steel. Aluminum, copper and brass,
High-speed steel and cold work steel. Nitriding steel, stainless and
acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal
For customers who value a long service life and shorter sawing times.
sawing times.
MEBA bandsaw blade - Performance+ 4900x34x304
€58.63*
OX490034304
The Performance + band saw blade impresses with its tooth profile
for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance.
wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials
with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels,
high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings
and unalloyed tool steel. Aluminum, copper and brass,
High-speed steel and cold work steel. Nitriding steel, stainless and
acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal
For customers who value a long service life and shorter sawing times.
sawing times.
MEBA bandsaw blade - Material+ 4900x34x203
€66.03*
OD490034203
The material + saw blade impresses with its precision
due to the ground positive rake angle and ground tooth gaps.
This reduces the cutting force at higher cutting speeds.
is reduced. Due to the cutting accuracy, it has a high load capacity in terms of
duration, heat and wear.
Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm².
tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes,
titanium alloyse.g.: rust- and acid-resistant steels,
Nickel-based alloysMaterial: M51Tooth shape: Normal
The Material+ has an aggressive tooth geometry
- which, in conjunction with the harder cutting edge material M51, is suitable for particularly
is suitable for particularly demanding materials.
MEBA bandsaw blade - Material+ 4900x34x406
€66.03*
OD490034406
The material + saw blade impresses with its precision
due to the ground positive rake angle and ground tooth gaps.
This reduces the cutting force at higher cutting speeds.
is reduced. Due to the cutting accuracy, it has a high load capacity in terms of
duration, heat and wear.
Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm².
tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes,
titanium alloyse.g.: rust- and acid-resistant steels,
Nickel-based alloysMaterial: M51Tooth shape: Normal
The Material+ has an aggressive tooth geometry
- which, in conjunction with the harder cutting edge material M51, is suitable for particularly
is suitable for particularly demanding materials.
MEBA bandsaw blade - Material+ 4900x34x304
€66.03*
OD490034304
The material + saw blade impresses with its precision
due to the ground positive rake angle and ground tooth gaps.
This reduces the cutting force at higher cutting speeds.
is reduced. Due to the cutting accuracy, it has a high load capacity in terms of
duration, heat and wear.
Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm².
tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes,
titanium alloyse.g.: rust- and acid-resistant steels,
Nickel-based alloysMaterial: M51Tooth shape: Normal
The Material+ has an aggressive tooth geometry
- which, in conjunction with the harder cutting edge material M51, is suitable for particularly
is suitable for particularly demanding materials.