MEBAMat 330
The MEBAmat 330 high-performance bandsaw is ideal for efficient production: automated, networked, cuts all materials from soft to hard, high precision, minimal staffing, safe and efficient in multi-shift operation.
Product information "MEBAMat 330"
MEBAmat: The powerhouse for efficient production use
For a wide range of sawing tasks and maximum productivity: The high-performance automatic saw cuts everything from soft to extremely hard materials, using all tool types, from bimetal to carbide. Fully networked and automated processes minimize overhead costs and require minimal personnel – ideal for continuous operation in single- or multi-shift use. The enclosed design ensures safe and clean operation.
Standard equipment
- Stable, torsion-free machine frame for highest quality
- Optimized chip flow via angled, converging material support surfaces
- Closed support surfaces for easy cleaning and reduced chip accumulation
- Hydraulics protected inside the machine frame yet easily accessible
- Leveling feet, forklift pockets, and tie-down eyes included as standard
- Optional retrofittable screw-type chip conveyor
- Full enclosure according to CE standards for quiet and safe operation
- Integrated control cabinet with large swing doors and service openings for easy access
- Plexiglass window for safe observation of the sawing process
- Double-portal saw frame with ball screw drive, low vibration, 3° tilt for improved cut quality
- Hydraulically pre-tensioned saw blade with carbide sliding guides and hardened anti-twist rollers
-
Roller-guided blade back for high cutting pressures and longer blade life
- Automatic adjustment of blade guidance according to material cross-section
- Saw frame feed via servo drive, stepless 0–600 mm/min, high force transmission
- Permanent cutting pressure and feed monitoring for process reliability
- Hydraulic saw blade tension for constant tension and blade break monitoring
- Saw blade cleaning with double brush, synchronized to blade speed, self-adjusting and removable
-
Material height adjustment, manual or automatic; optional laser height and width detection
-
Hydraulic clamp system with full-stroke cylinder, reversible clamping bars, linear ball-screw guides, material-end detection; optional hydraulic lift
-
Freestanding machine roller conveyor, load capacity up to 650 kg/m, 8 support rollers, ball-bearing, easily replaceable
-
Material lift device raises material after cutting, increasing blade life
-
Angled cut-off chute with integrated coolant return; optional support table for chip discharge
-
3.9 kW saw motor, stepless 15–150 m/min, double-sided stable bearings
-
Coolant system: 160 l tank, filter screen, 90 l/min pump at 3 m lift, easily removable; optional electronic level and flow monitoring
-
Operation via touchscreen, bus networking, Windows CE, buffer system, and remote maintenance with service router
Optional
-
Zero stop
-
Material database
-
Clamping pressure regulation
-
Swivel control panel – flexibly mountable
-
Job menu
-
Multi-bar clamping system
-
Cut progress monitoring
-
Micro-dosing system
-
Compressor for micro-dosing system
-
LED work light
-
Work table on outfeed side
-
Water spray gun MEBAmat 3/8"
-
Coolant level and flow monitoring
-
Double-sided opening / shortened remaining piece
-
Material monitoring
-
Laser pointer for cut line marking / layout cuts
-
Vertical roller
-
Refractometer
-
Band tension testing device
-
Signal light with three-color status indicator
-
Coolant collection tray
- Roller conveyors available in various lengths
Specifications subject to change without notice.| Product number: | 330 MAT0000 |
|---|---|
| Automation level: | Serial cut |
| Cutting material: | Pipe, Round Stock Material |
| Cutting speed: | 15-200 m/min |
| Dimensions: | 1700x2400x2200 mm |
| Max. cutting range height ↕ (mm): | 330 |
| Max. cutting range width ↔ (mm): | 350 |
| Max. cutting range Ø (mm): | 330 |
| Remaining piece length: | 20 mm |
| Saw blade dimensions: | 4900x34x1,1 mm |
| Saw blade drive: | 3,9 kW |
| Saw blade tension: | Hydraulic |
| Type: | Miter Saw 90° |
| Type series: | MEBAmat |
| Weight: | 2600 KG |
| Working height: | 750 mm |
Login
Fitting parts
MEBA bandsaw blade - Allround+ 4900x34x812
€45.76*
O-490034812
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Allround+ 4900x34x304
€45.76*
O-490034304
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Allround+ 4900x34x406
€45.76*
O-490034406
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Allround+ 4900x34x203
€45.76*
O-490034203
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium
workpiece dimensions, profiles with thin or medium wall thicknesses,
short-chip materials up to medium to large workpiece
workpiece dimensions, steels and non-ferrous metals, materials with
tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams.
For example: Structural steel, deep-drawing steel and free-cutting steel
Material: M42
Tooth shape: Normal
A real "all-rounder".
MEBA bandsaw blade - Performance+ 4900x34x406
€58.63*
OX490034406
The Performance + band saw blade impresses with its tooth profile
for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance.
wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials
with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels,
high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings
and unalloyed tool steel. Aluminum, copper and brass,
High-speed steel and cold work steel. Nitriding steel, stainless and
acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal
For customers who value a long service life and shorter sawing times.
sawing times.
MEBA bandsaw blade - Performance+ 4900x34x203
€58.63*
OX490034203
The Performance + band saw blade impresses with its tooth profile
for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance.
wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials
with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels,
high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings
and unalloyed tool steel. Aluminum, copper and brass,
High-speed steel and cold work steel. Nitriding steel, stainless and
acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal
For customers who value a long service life and shorter sawing times.
sawing times.
MEBA bandsaw blade - Performance+ 4900x34x304
€58.63*
OX490034304
The Performance + band saw blade impresses with its tooth profile
for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance.
wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials
with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels,
high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings
and unalloyed tool steel. Aluminum, copper and brass,
High-speed steel and cold work steel. Nitriding steel, stainless and
acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal
For customers who value a long service life and shorter sawing times.
sawing times.
MEBA bandsaw blade - Material+ 4900x34x304
€66.03*
OD490034304
The material + saw blade impresses with its precision
due to the ground positive rake angle and ground tooth gaps.
This reduces the cutting force at higher cutting speeds.
is reduced. Due to the cutting accuracy, it has a high load capacity in terms of
duration, heat and wear.
Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm².
tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes,
titanium alloyse.g.: rust- and acid-resistant steels,
Nickel-based alloysMaterial: M51Tooth shape: Normal
The Material+ has an aggressive tooth geometry
- which, in conjunction with the harder cutting edge material M51, is suitable for particularly
is suitable for particularly demanding materials.
MEBA bandsaw blade - Material+ 4900x34x203
€66.03*
OD490034203
The material + saw blade impresses with its precision
due to the ground positive rake angle and ground tooth gaps.
This reduces the cutting force at higher cutting speeds.
is reduced. Due to the cutting accuracy, it has a high load capacity in terms of
duration, heat and wear.
Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm².
tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes,
titanium alloyse.g.: rust- and acid-resistant steels,
Nickel-based alloysMaterial: M51Tooth shape: Normal
The Material+ has an aggressive tooth geometry
- which, in conjunction with the harder cutting edge material M51, is suitable for particularly
is suitable for particularly demanding materials.
MEBA bandsaw blade - Material+ 4900x34x406
€66.03*
OD490034406
The material + saw blade impresses with its precision
due to the ground positive rake angle and ground tooth gaps.
This reduces the cutting force at higher cutting speeds.
is reduced. Due to the cutting accuracy, it has a high load capacity in terms of
duration, heat and wear.
Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm².
tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes,
titanium alloyse.g.: rust- and acid-resistant steels,
Nickel-based alloysMaterial: M51Tooth shape: Normal
The Material+ has an aggressive tooth geometry
- which, in conjunction with the harder cutting edge material M51, is suitable for particularly
is suitable for particularly demanding materials.