MEBAbase 24 DG
MEBAbase: The must-have for doers.
The starter saws in the MEBAbase series are suitable for a wide ranfe of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone.
The portfolio ranges from smalll manual miter saws to automatic straight-cutting machines and is therefore the basis for your workshop.
The universally applicable MEBAbase 24 DG-HS mitre band saw is ergonomically sophisticated and has an optimum price-performance ratio.
Simple central operation.
Standard equipment of the MEBAbase 24 DG-HS
- MEBA miter system: Large, pivoting table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade.
- Manual miter adjustment from 90° - 30°, infinitely variable according to scale to 1.0° accuracy.
- The miter pivot point is the intersection point between the saw blade and the material system, which is why the length dimension does not change when the angle position changes.
- End stops at 30° - 45° - 90° - 45°
- Hydraulic material clamping. The material is clamped parallel at 90° for every angular position of the saw frame.
- Central machine operation
- Cutting pressure reduction due to the dead weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via hydraulic damping cylinder and weight compensation spring.
- Saw blade drive with limit stop
- Stepless clamping jaw adjustment
- Movable belt guide arm, adjustment to material widht
- Saw blade deflection roller carbide guide
- Practical chip tray with drip tray
- Rotating chip cleaning brush
- Mechanical saw blade tension
- Operating instructions and spare parts list (digital)
- 1 MEBA bimetal band saw blade 4/6 ZpZ mounted on machine
- Complete coolant system Paint finish anthracite (RAL 7016)
Subject to technical changes. You will receive details of the exact delivery time in the order confirmation.
The machine is delivered WITHOUT hydraulic oil. This (approx. 25 litres) must be filled before commissioning and the fill level checked.
| Automation level: | Single cut |
|---|---|
| Dimensions: | 800x1720x1450 mm |
| Max. cutting range height ↕ (mm): | 240 |
| Max. cutting range width ↔ (mm): | 310 |
| Max. cutting range Ø (mm): | 240 |
| Type: | Miter Saw |
| Schnittgeschwindigkeit: | 35 + 75 m/min |
| Reststücklänge: | 60 mm |
| Antrieb - Sägeband: | 1,1/1,8 kW |
| Sägebandspannung: | Mechanisch |
| Sägebandabmessung: | 2910x27x0,9 mm |
| Arbeitshöhe: | 900 mm |
| Gewicht: | 470 KG |
Login
10 July 2025 11:23
Säge mit Gehrung
Tolle Säge, passt perfekt in meine Werkstatt und tut was sie tun soll. Exakte Schnitte.
Accessories
