Metal bandsaw MEBAswing 260 DG-H
Price on request
Description
Product information "Metal bandsaw MEBAswing 260 DG-H"
The Universal Helper: Clever and Uncomplicated
Especially suitable for universal use with different cross-sections, materials and often changing miter cuts. A metal band saw machine for straight and miter cuts, infinitely adjustable from 45° - 90° - 45° - 30°. Rotational center unchanged at each angle setting, thus exact length measurement at 90° and in the miter range.
The universally applicable miter band saw MEBAswing 260 DG
is ergonomically mature and has an optimal price-performance ratio.
Easy central control.
The machine control complies with the CE standard 89/289
Technical Data
| Cutting range | 90° - 260 - 300x260 |
| Remnant length | 25mm |
| Cutting speed | 35 u.75m/min polschaltbar |
| Drive - saw band | 1,1/1,8kW; 400V, 50Hz |
| Saw frame feed | Infinitely adjustable up to 300mm/min, hydraulically adjustable |
| Saw band tension | Mechanical |
| Saw band dimensions | 3350 x 27 x 0,9mm |
| Working height | 900mm (without installation elements) |
| Weight | 710kg |
| Dimensions | 800 x 1720 x 1450mm |
Standard equipment of the MEBAswing 260 DG-H
- MEBA mitre system: Rotating table avoids sawing up of the material support. Material is always clamped rectangular and close to the saw blade.
- Manual miter setting from 90° - 30°, infinitely adjustable according to scale with 0.5° accuracy
- Miter pivot point is the intersection between saw band and material feed, so no change in length measurement is generated when changing the angle setting
- End stops at 30° - 45° - 90° - 45°
- Material quick clamping. The material is clamped parallel to 90° at each angle setting of the saw frame.
- Central machine control
- Cutting pressure reduction by the own weight of the heavy, torsion-resistant cast saw frame and fine adjustment depending on the material cross-section via hydraulic damping cylinder and weight compensation spring
- Saw band drive with end switch-off
- Infinitely adjustable clamping jaws with eccentric clamping
- Movable guide arm, adjustment to material width
- Saw band deflection rollers hard metal guide
- Chip cleaning brush running along
- Saw band tension mechanical
- Operating instructions and spare parts list on CD-ROM
- 1 MEBA bimetal saw band 4/6 ZpZ mounted on the machine
- Complete cooling system with electric immersion pump
- Painting silver gray/ blue gray (RAL 7001/ RAL 7031)
- Hydraulic lifting of the saw frame with check valve
Technical changes reserved.
You will receive information on the exact delivery time in the order confirmation.
Technical Properties
| Automation level: | Single cut |
|---|---|
| Cutting material: | Pipe, Round Stock Material |
| Cutting speed: | 35 + 75 m/min |
| Dimensions: | 800x1720x1450 mm |
| Max. cutting range height ↕ (mm): | 260 |
| Max. cutting range width ↔ (mm): | 300 |
| Max. cutting range Ø (mm): | 230 |
| Remaining piece length: | 25 mm |
| Saw blade dimensions: | 3350x27x0,9 mm |
| Saw blade drive: | 1,1/1,8 kW |
| Saw blade tension: | Mechanical |
| Type: | Double Mitre Saw 30°-150° |
| Type series: | MEBAswing |
| Weight: | 710 KG |
| Working height: | 900 mm |
| version: | Standard Machine, With Laser Light, With Micro Dispensing Unit & Laser Light, With Microdosing Unit |
Reviews 0
Login
Zubehörartikel
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium workpiece dimensions, profiles with thin or medium wall thicknesses, short-chip materials up to medium to large workpiece workpiece dimensions, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams. For example: Structural steel, deep-drawing steel and free-cutting steel Material: M42 Tooth shape: Normal A real "all-rounder".
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium workpiece dimensions, profiles with thin or medium wall thicknesses, short-chip materials up to medium to large workpiece workpiece dimensions, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams. For example: Structural steel, deep-drawing steel and free-cutting steel Material: M42 Tooth shape: Normal A real "all-rounder".
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium workpiece dimensions, profiles with thin or medium wall thicknesses, short-chip materials up to medium to large workpiece workpiece dimensions, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams. For example: Structural steel, deep-drawing steel and free-cutting steel Material: M42 Tooth shape: Normal A real "all-rounder".
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium workpiece dimensions, profiles with thin or medium wall thicknesses, short-chip materials up to medium to large workpiece workpiece dimensions, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams. For example: Structural steel, deep-drawing steel and free-cutting steel Material: M42 Tooth shape: Normal A real "all-rounder".
The Allround + saw blade impresses with its high cutting accuracy and wear resistance thanks to an alloyed high-speed steel. The advantage here is a long service life for sawing work that is susceptible to vibrationApplication area: For thin-walled material and wall thicknesses, small workpiece dimensions, profiles with thin or medium workpiece dimensions, profiles with thin or medium wall thicknesses, short-chip materials up to medium to large workpiece workpiece dimensions, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², thick-walled profiles as well as pipes and beams. For example: Structural steel, deep-drawing steel and free-cutting steel Material: M42 Tooth shape: Normal A real "all-rounder".
The Profile + band saw blade impresses with improved belt service life due to the resistant, impact-resistant tooth edge and tooth edge and optimized resistance to increased abrasion conditions and cutting temperatures. abrasion conditions and cutting temperatures. Application area: Small and medium material and wall thicknesses wall thicknesses, steel beams, profiles, pipes, workpiece mix, sawing bundles
The Profile + band saw blade impresses with improved belt service life due to the resistant, impact-resistant tooth edge and tooth edge and optimized resistance to increased abrasion conditions and cutting temperatures. abrasion conditions and cutting temperatures. Application area: Small and medium material and wall thicknesses wall thicknesses, steel beams, profiles, pipes, workpiece mix, sawing bundles
The Profile + band saw blade impresses with improved belt service life due to the resistant, impact-resistant tooth edge and tooth edge and optimized resistance to increased abrasion conditions and cutting temperatures. abrasion conditions and cutting temperatures. Application area: Small and medium material and wall thicknesses wall thicknesses, steel beams, profiles, pipes, workpiece mix, sawing bundles
The Performance + band saw blade impresses with its tooth profile for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance. wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels, high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings and unalloyed tool steel. Aluminum, copper and brass, High-speed steel and cold work steel. Nitriding steel, stainless and acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal For customers who value a long service life and shorter sawing times. sawing times.
The Performance + band saw blade impresses with its tooth profile for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance. wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels, high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings and unalloyed tool steel. Aluminum, copper and brass, High-speed steel and cold work steel. Nitriding steel, stainless and acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal For customers who value a long service life and shorter sawing times. sawing times.
The Performance + band saw blade impresses with its tooth profile for easier sawing with reduced feed rates. It withstands higher cutting temperatures and downforce, giving it extremely high wear resistance. wear resistance.Field of application: DThick-walled profiles, steels and non-ferrous metals, materials with tensile strengths of up to 1,400 N/mm², stainless and acid-resistant steels, high feed rates, shortened sawing timese.g: Structural steel, deep-drawing steel, free-cutting steel, ball bearings and unalloyed tool steel. Aluminum, copper and brass, High-speed steel and cold work steel. Nitriding steel, stainless and acid-resistant steels. TitaniumMaterial: M42Tooth shape: Normal For customers who value a long service life and shorter sawing times. sawing times.
The material + saw blade impresses with its precision due to the ground positive rake angle and ground tooth gaps. This reduces the cutting force at higher cutting speeds. is reduced. Due to the cutting accuracy, it has a high load capacity in terms of duration, heat and wear. Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm². tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes, titanium alloyse.g.: rust- and acid-resistant steels, Nickel-based alloysMaterial: M51Tooth shape: Normal The Material+ has an aggressive tooth geometry - which, in conjunction with the harder cutting edge material M51, is suitable for particularly is suitable for particularly demanding materials.
The material + saw blade impresses with its precision due to the ground positive rake angle and ground tooth gaps. This reduces the cutting force at higher cutting speeds. is reduced. Due to the cutting accuracy, it has a high load capacity in terms of duration, heat and wear. Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm². tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes, titanium alloyse.g.: rust- and acid-resistant steels, Nickel-based alloysMaterial: M51Tooth shape: Normal The Material+ has an aggressive tooth geometry - which, in conjunction with the harder cutting edge material M51, is suitable for particularly is suitable for particularly demanding materials.
The material + saw blade impresses with its precision due to the ground positive rake angle and ground tooth gaps. This reduces the cutting force at higher cutting speeds. is reduced. Due to the cutting accuracy, it has a high load capacity in terms of duration, heat and wear. Field of application: FFor demanding cutting conditions, materials with tensile strengths of up to 1,700 N/mm². tensile strengths of up to 1,700 N/mm², high-alloy materials, bronzes, titanium alloyse.g.: rust- and acid-resistant steels, Nickel-based alloysMaterial: M51Tooth shape: Normal The Material+ has an aggressive tooth geometry - which, in conjunction with the harder cutting edge material M51, is suitable for particularly is suitable for particularly demanding materials.
Measuring stop with scale, free travel device incl. guide rail
Micro dosing system 24 V for retrofit, including 1 L spray oil and 3 spray heads. Provides precise lubrication, clean cutting without drips, easy integration with 6 m hose and 6 bar compressed air, 3.4 kg.
Manual, digital measuring stop, linear guided
Flat steel brush for efficient chip removal on saw blades. Reduces residues, prevents clogging, durable and lightweight (0.01 kg). Ideal for easy handling and extended cleaning intervals.